Learn more about the cat 5 cable system using these wiring diagrams in best quality! In these 101 Diagramss, you’ll get some explanations and guide on how to make and set your ethernet cat 5 cable system. Let’s start with the cat 5 cable diagram of the wiring connection, explained in color below.
Using this guide from cat 5 cable diagram, making Ethernet cables is easy with a box of bulk Category 5e Ethernet cable and RJ-45 connectors that are attached to the cut ends of your preferred cable length. There are two kinds of Ethernet cables you can make, Straight Through and Crossover. Straight Through Ethernet cables are the standard cable used for almost all purposes, and are often called “patch cables”. It is highly recommend you duplicate the color order as shown on the left. Note how the green pair is not side-by-side as are all the other pairs. This configuration allows for longer wire runs. Take a look at the following wire diagram.
Meanwhile, the purpose of a Crossover Ethernet cable is to directly connect one computer to another computer (or device) without going through a router, switch or hub. If you require a cable to connect two Ethernet devices directly together without a hub or when you connect two hubs together, you will need to use a Crossover cable instead.
All these pictures presented are printable cat 5 cable diagram resources. Learn more about the other educational diagrams by browsing through our categories or looking it up on the search column!